Decimal Hours Chart: Minutes to Decimal for Timesheets

To turn minutes into decimal hours, divide by 60: 15 minutes = 0.25 hours, 30 minutes = 0.50, 45 minutes = 0.75, and 20 minutes = 0.33. So 7 hours 45 minutes is 7.75 hours, and 8 hours 20 minutes is 8.33 hours. To go back, multiply the decimal part by 60: 0.6 hours is 36 minutes. Payroll and invoicing systems use decimal hours because you cannot multiply “7:45” by an hourly rate, but you can multiply 7.75. This page has the full chart for every minute from 1 to 60 (to two and three decimal places), the tenth-hour and quarter-hour rounding tables that time clocks use, and two worked examples, including the small rounding error that appears when you add up rounded days. Facts are as of November 2026.

Key facts (as of November 2026)

  • Decimal hours = hours + minutes ÷ 60. Minutes = decimal part × 60.
  • Common values: 6 min = 0.10, 10 min = 0.17, 15 min = 0.25, 20 min = 0.33, 30 min = 0.50, 40 min = 0.67, 45 min = 0.75, 50 min = 0.83.
  • Only multiples of 3 minutes give an exact two-place decimal (3 min = 0.05). Everything else is rounded.
  • US rule (29 CFR 785.48(b)): recording time “to the nearest 5 minutes, or to the nearest one-tenth or quarter of an hour” “will be accepted, provided that it is used in such a manner that it will not result, over a period of time, in failure to compensate the employees properly for all the time they have actually worked.”
  • Add up minutes first and convert once at the end to avoid rounding drift.

Minutes to decimal hours: the full chart

Each value is minutes ÷ 60, rounded half-up. The two-place column is what most timesheets show; the three-place column is useful when a payroll system keeps more precision. We generated the chart with exact decimal arithmetic and checked every cell a second way with integer arithmetic.

Min 2 dp 3 dp Min 2 dp 3 dp Min 2 dp 3 dp
1 0.02 0.017 21 0.35 0.350 41 0.68 0.683
2 0.03 0.033 22 0.37 0.367 42 0.70 0.700
3 0.05 0.050 23 0.38 0.383 43 0.72 0.717
4 0.07 0.067 24 0.40 0.400 44 0.73 0.733
5 0.08 0.083 25 0.42 0.417 45 0.75 0.750
6 0.10 0.100 26 0.43 0.433 46 0.77 0.767
7 0.12 0.117 27 0.45 0.450 47 0.78 0.783
8 0.13 0.133 28 0.47 0.467 48 0.80 0.800
9 0.15 0.150 29 0.48 0.483 49 0.82 0.817
10 0.17 0.167 30 0.50 0.500 50 0.83 0.833
11 0.18 0.183 31 0.52 0.517 51 0.85 0.850
12 0.20 0.200 32 0.53 0.533 52 0.87 0.867
13 0.22 0.217 33 0.55 0.550 53 0.88 0.883
14 0.23 0.233 34 0.57 0.567 54 0.90 0.900
15 0.25 0.250 35 0.58 0.583 55 0.92 0.917
16 0.27 0.267 36 0.60 0.600 56 0.93 0.933
17 0.28 0.283 37 0.62 0.617 57 0.95 0.950
18 0.30 0.300 38 0.63 0.633 58 0.97 0.967
19 0.32 0.317 39 0.65 0.650 59 0.98 0.983
20 0.33 0.333 40 0.67 0.667 60 1.00 1.000

Note that 1 minute is 0.017 hours, which rounds to 0.02, not 0.01. Some printed charts truncate instead of rounding (showing 0.01 for one minute and 0.98 for 59). Over a pay period that difference can add up, so check which method your employer or software uses.

How to convert, step by step

  1. Hours and minutes to decimal. Keep the whole hours. Divide the minutes by 60. 6 h 48 min: 48 ÷ 60 = 0.8, so 6.80 hours.
  2. Decimal to hours and minutes. Keep the whole number. Multiply the decimal part by 60. 3.45 hours: 0.45 × 60 = 27, so 3 h 27 min.
  3. Seconds, if you need them. Divide seconds by 3,600. 90 seconds is 0.025 hours.

A common trap is reading 7.30 as “7 hours 30 minutes”. It is 7 hours 18 minutes (0.30 × 60). Seven and a half hours is 7.50.

Tenth-hour and quarter-hour rounding

Many time clocks do not record exact minutes. The US Department of Labor’s regulation on “rounding” practices reads in full: “It has been found that in some industries, particularly where time clocks are used, there has been the practice for many years of recording the employees’ starting time and stopping time to the nearest 5 minutes, or to the nearest one-tenth or quarter of an hour. Presumably, this arrangement averages out so that the employees are fully compensated for all the time they actually work. For enforcement purposes this practice of computing working time will be accepted, provided that it is used in such a manner that it will not result, over a period of time, in failure to compensate the employees properly for all the time they have actually worked.” (29 CFR 785.48(b)). Our reading: the rounding must even out over time, not always favour the employer. The regulation does not say how to round a punch that falls exactly halfway. Other countries and some US states have their own rules, so check locally.

Here is what “nearest” means in each system (our calculation):

Minutes past the hour Nearest tenth (6 min) Decimal
0–2 :00 .0
3–8 :06 .1
9–14 :12 .2
15–20 :18 .3
21–26 :24 .4
27–32 :30 .5
33–38 :36 .6
39–44 :42 .7
45–50 :48 .8
51–56 :54 .9
57–59 next hour .0

Minute 3 (and 9, 15 and so on) is exactly halfway between two tenths. The regulation does not cover these ties; our table rounds them up (our choice). A system that rounds ties down will put them in the lower row.

Minutes past the hour Nearest quarter Decimal
0–7 :00 .00
8–22 :15 .25
23–37 :30 .50
38–52 :45 .75
53–59 next hour .00

Under quarter-hour rounding, 7 minutes is the largest amount that rounds down. A punch at 8:07 records as 8:00; a punch at 8:08 records as 8:15.

Worked example 1: one day

In at 8:53 AM, out at 5:08 PM, with a 30-minute unpaid lunch.

  • Exact time: 8:53 to 17:08 is 8 h 15 min; minus 30 min = 7 h 45 min = 7.75 hours.
  • With quarter-hour rounding of each punch: 8:53 rounds to 9:00 and 5:08 to 5:15, so 9:00 to 5:15 minus 30 min = 7 h 45 min = 7.75 hours. Here rounding happens to change nothing, because the two punches move in the same direction by similar amounts.
  • At $24.00 an hour, 7.75 × 24 = $186.00.

Worked example 2: why you should add minutes first

Five days of 7 h 20 min each. If you round each day to 7.33 and add, you get 5 × 7.33 = 36.65 hours. If you add the minutes first (5 × 440 = 2,200 minutes) and convert once, you get 36.67 hours (36.666… rounded). The gap is 0.02 hours, or about 1 minute, in a single week; on a big payroll it adds up. If you fill in a paper or spreadsheet timesheet, keep a column of total minutes and convert the week’s total at the end.

Decimal hours vs decimal time

Decimal hours are just a way of writing ordinary hours, so 0.5 hours is still 30 minutes. “Decimal time” in the other sense is different: a day split into 10 hours of 100 minutes. Our article on why there are 24 hours in a day explains why that idea never replaced the 24-hour day. If you need to count time spans rather than convert them, our stopwatch and timer run in the browser, and the military time chart helps with punches recorded on the 24-hour clock.

How we checked

The 60-row chart was generated with Python’s decimal module (minutes ÷ 60, rounded half-up) and every cell was rechecked with integer arithmetic ((minutes × 200 + 60) ÷ 120, and the same for three places); all 120 values agreed. The tenth- and quarter-hour tables and both worked examples were calculated the same way. The Department of Labor rule was read today on Cornell’s Legal Information Institute copy of the Code of Federal Regulations.

Sources

Frequently asked questions

What is 15 minutes in decimal hours?

0.25 hours.

What is 40 minutes as a decimal?

0.67 hours (0.667 to three places).

How do I convert 7 hours 30 minutes to decimal?

7.50 hours. 30 ÷ 60 = 0.5.

What is 0.8 hours in minutes?

48 minutes (0.8 × 60).

Is 7.30 hours the same as 7 hours 30 minutes?

No. 7.30 hours is 7 hours 18 minutes. 7 hours 30 minutes is 7.50 hours.

Is rounding time clock punches legal in the US?

Under 29 CFR 785.48(b), recording time “to the nearest 5 minutes, or to the nearest one-tenth or quarter of an hour” “will be accepted” for federal enforcement if it does not result, over time, in failing to pay employees for all the time they actually worked. State or provincial rules may differ.

Similar Posts