Leap Seconds Explained: All 27, and Why They End in 2027
A leap second is an extra second added to the world’s official time, UTC, so that atomic clocks stay in step with Earth’s slightly irregular rotation. When one is added, the last minute of the day has 61 seconds and clocks read 23:59:60 before midnight UTC. There have been 27 leap seconds, all between June 1972 and December 2016, and the official file says there will not be one at the end of 2026. Now they are ending: in October 2026 the world’s measurement conference decided that from May 20, 2027, UTC will run continuously, without leap seconds. Below is the full list computed from the official leap second file, the patterns in it, why none has been needed for almost ten years, and what the change means for computers. Facts are as of November 2026.
At a glance
- Total leap seconds: 27 (1972 to 2016), all positive (a second added, never removed).
- Most recent: December 31, 2016, at 23:59:60 UTC.
- UTC is now 37 seconds behind International Atomic Time (TAI): a 10-second start in 1972 plus the 27 leap seconds.
- No leap second at the end of December 2026 (IERS Bulletin C 72).
- Continuous UTC, with no more leap seconds, starts May 20, 2027 (CGPM Resolution 5, 2026).
Why leap seconds exist
Today’s second is defined by atomic clocks, not by the Sun. But our days come from Earth turning, and Earth is not a perfect clock. NIST puts it simply: “the speed of the Earth’s rotation is not constant”. If nothing were done, atomic time would slowly drift away from the time the Sun shows. Until now the rule was that “Leap seconds are added in order to keep the difference between UTC and astronomical time (UT1) to less than 0.9 seconds.” The International Earth Rotation and Reference Systems Service (IERS) watches the gap and announces its decisions in Bulletin C.
Every leap second, 1972 to 2016
This table comes straight from leap-seconds.list, the file that ships with the IANA time zone database (version 2026e) and is used by computers to know where leap seconds fall. Each second was inserted at 23:59:60 UTC at the end of the date shown. The last column is TAI−UTC after that leap second.
| # | Added at the end of | Day of week | TAI−UTC after |
|---|---|---|---|
| 1 | June 30, 1972 | Friday | 11 s |
| 2 | December 31, 1972 | Sunday | 12 s |
| 3 | December 31, 1973 | Monday | 13 s |
| 4 | December 31, 1974 | Tuesday | 14 s |
| 5 | December 31, 1975 | Wednesday | 15 s |
| 6 | December 31, 1976 | Friday | 16 s |
| 7 | December 31, 1977 | Saturday | 17 s |
| 8 | December 31, 1978 | Sunday | 18 s |
| 9 | December 31, 1979 | Monday | 19 s |
| 10 | June 30, 1981 | Tuesday | 20 s |
| 11 | June 30, 1982 | Wednesday | 21 s |
| 12 | June 30, 1983 | Thursday | 22 s |
| 13 | June 30, 1985 | Sunday | 23 s |
| 14 | December 31, 1987 | Thursday | 24 s |
| 15 | December 31, 1989 | Sunday | 25 s |
| 16 | December 31, 1990 | Monday | 26 s |
| 17 | June 30, 1992 | Tuesday | 27 s |
| 18 | June 30, 1993 | Wednesday | 28 s |
| 19 | June 30, 1994 | Thursday | 29 s |
| 20 | December 31, 1995 | Sunday | 30 s |
| 21 | June 30, 1997 | Monday | 31 s |
| 22 | December 31, 1998 | Thursday | 32 s |
| 23 | December 31, 2005 | Saturday | 33 s |
| 24 | December 31, 2008 | Wednesday | 34 s |
| 25 | June 30, 2012 | Saturday | 35 s |
| 26 | June 30, 2015 | Tuesday | 36 s |
| 27 | December 31, 2016 | Saturday | 37 s |
Because the leap second is inserted at midnight UTC, it happened at a different local time around the world. For the last one, on December 31, 2016, it came at 6:59:60 PM in New York, 3:59:60 PM in Vancouver and 8:59:60 AM on January 1, 2017 in Tokyo.
What the list shows
- Only two dates were ever used: 16 leap seconds came at the end of December and 11 at the end of June.
- Front-loaded: 22 of the 27 came before 2000, and the 1970s alone had 9. Only 5 came after 1999.
- 1972 is the only year with two (June 30 and December 31).
- Average spacing: about 625 days, a little under 21 months, between the first and the last.
- Longest gap before now: 2,557 days, from December 31, 1998 to December 31, 2005.
- The current gap is the longest ever: by November 8, 2026 it had been 3,599 days since the last leap second, and it will be 3,792 days on May 20, 2027, when leap seconds end.
Why none has been added since 2016
In recent years the solid Earth has been spinning slightly faster, which Scripps researchers link to changes in Earth’s core, so UTC has not fallen behind the Sun and no leap second has been needed. The IERS confirmed in its July 2026 bulletin that “NO leap second will be introduced at the end of December 2026” and that UTC-TAI = -37 s until further notice. A 2024 study in Nature by geophysicist Duncan Agnew suggested the opposite problem could arrive: “a negative leap second might be needed some time in 2028”, meaning a minute only 59 seconds long. No negative leap second has ever been used, and much software has never been tested for one.
The decision: continuous UTC from May 20, 2027
At its 28th meeting, held in Versailles on October 13 to 15, 2026, the General Conference on Weights and Measures (CGPM) adopted Resolution 5. It “decides that continuous UTC will become effective on 20 May 2027” and sets the maximum value for the difference between UT1 and UTC at 3 600 seconds (1 hour), instead of 0.9 seconds. In plain terms:
- UTC stops being stepped by single seconds. The 61-second (or 59-second) minute goes away.
- UTC and Sun time will drift apart very slowly; the new limit of one hour gives centuries of room.
- TAI−UTC should stay at 37 seconds: no leap second is scheduled before May 20, 2027, and continuous UTC ends further steps.
- Clock times you see do not change. Nobody needs to reset a watch.
The current leap second file itself says it expires on June 28, 2027, which is normal: the file is reissued every six months. Systems that read it should keep updating their tz data as usual.
Why computers struggled with leap seconds
Most software assumes every minute has 60 seconds and every day 86,400. Unix time, used by most servers, does not count leap seconds at all, so a leap second either repeats a second or is hidden. Some large operators avoid the jump by “smearing” it: Google recommends “a 24-hour linear smear from noon to noon UTC”, during which each second “is about 11.6 μs longer than an SI second”. Continuous UTC removes the need for these workarounds after May 2027.
What it means for you
- Everyday clocks: nothing changes. Your phone, our UTC clock and every time zone conversion keep working the same way.
- GPS and atomic time: the US Naval Observatory states that “GPS is ahead of UTC by 18 seconds” and TAI is ahead of GPS by 19, so TAI is 37 seconds ahead of UTC. With no new leap seconds, these gaps should stay fixed.
- Developers: keep tz data and leap second files updated, but code paths for 23:59:60 should never fire again after May 20, 2027.
- Astronomers and navigators who need Earth-rotation time will use the published UT1−UTC values, as they already do.
For the difference between UTC and Greenwich Mean Time, see our GMT page.
How we counted
We read the 28 entries in leap-seconds.list (tz 2026e): the 1972 starting value of 10 seconds plus 27 leap second entries. Dates, weekdays and gaps were computed in Python and cross-checked against the separate “leapseconds” file in the same tz release, which lists the same 27 insertions, all positive, ending December 31, 2016.
Sources
- BIPM: Resolution 5 of the 28th CGPM (2026), continuity of UTC
- IERS Bulletin C 72 (July 6, 2026)
- NIST: Leap seconds FAQs
- US Naval Observatory: Leap seconds (GPS and TAI offsets)
- BIPM: 28th meeting of the CGPM (13 to 15 October 2026)
- Scripps Institution of Oceanography: Global warming influencing global timekeeping (March 27, 2024)
- Google Public NTP: Leap smear
- IANA: Sources for time zone and daylight saving time data (includes leap second files)
Frequently asked questions
How many leap seconds have there been?
27, from June 30, 1972 to December 31, 2016. All of them added a second.
When was the last leap second?
At 23:59:60 UTC on December 31, 2016.
Is there a leap second in 2026?
No. The IERS announced in July 2026 that no leap second will be introduced at the end of December 2026.
Are leap seconds being abolished?
Yes. Under CGPM Resolution 5 (2026), UTC becomes continuous on May 20, 2027, with no further leap seconds. The allowed gap between UTC and Earth-rotation time grows from 0.9 seconds to one hour.
What is a negative leap second?
A removed second, making a minute 59 seconds long. It has never happened. A 2024 study suggested one might be needed around 2028, but continuous UTC from May 2027 is designed to avoid any step.
Do I need to do anything?
No. Clock times do not change. Only specialised systems that handle 23:59:60 are affected.