Atomic Clock Not Setting? Fixes for WWVB Radio Clocks
A radio-controlled (“atomic”) clock that will not set itself usually has one of three problems: it cannot hear the radio signal (try overnight, by a window facing the transmitter, away from screens), it has the wrong time zone selected (the hour is off but the minutes are right), or its daylight saving switch is wrong (the hour is off by exactly one). In North America the signal is NIST’s WWVB, broadcast on 60 kHz from near Fort Collins, Colorado, and NIST says it is “easiest to receive when it is dark at both WWVB and at the site where the clock is located”. 2026 added a new cause in Canada: British Columbia, Alberta and Manitoba stopped changing their clocks, but WWVB still tells clocks to follow the US daylight saving schedule. This guide gives a symptom-by-symptom fix list, the exact settings that keep a radio clock right in those provinces, and the signals used in Europe and Japan. Facts are as of November 2026.
Key facts (as of November 2026)
- WWVB: 60 kHz, near Fort Collins, Colorado; effective radiated power 70 kW; used by “millions of people throughout North America” (NIST).
- WWVB “broadcasts UTC as opposed to local time”; its code includes “flags that indicate the status of Daylight Saving Time, leap years, and leap seconds” (NIST). Your clock applies the time zone you select.
- Minutes and seconds are the same in every WWVB zone; only the hour differs. Right minutes + wrong hour = a settings problem, not reception.
- First sync can take “more than one minute … (sometimes 5 minutes or longer)” (NIST). Reception is best at night.
- BC (UTC-7), Alberta (UTC-6) and Manitoba (UTC-5) no longer change clocks. Our workaround: pick the zone whose standard time matches that offset and turn DST off.
Quick diagnosis: what is wrong?
| What you see | Likely cause | Fix |
|---|---|---|
| Time is off by exactly 1 hour | DST setting wrong for your area | Turn DST on if your area changes clocks, off if it does not (Arizona, Hawaii, Saskatchewan, and since November 2026 BC, Alberta, Manitoba) |
| Off by 2 or 3 hours, minutes correct | Wrong time zone selected | Set the zone button to your zone (see the table below) |
| Minutes are wrong or clock shows 12:00 / dashes | No successful sync yet | Reception fixes below; leave it overnight |
| Was fine, then drifted after weeks | Lost signal (moved, new electronics, season) | Move it, force a sync, leave overnight |
| Wrong after a battery change | Clock restarted without a signal | Recommended batteries, then force a sync near a window |
| Changed by an hour on the wrong date | Clock follows the US DST schedule | Normal for US rules; outside the US, set DST off and adjust by hand if your rules differ |
NIST makes the key point about minutes: “Remember, minutes and seconds are the same in all time zones within the WWVB coverage area; only hours are different” (NIST: Help with WWVB radio controlled clocks).
Reception fixes that work
- Try at night. The coverage area “is largest at night, and smallest in the daytime” (NIST). Leave the clock overnight before deciding it is broken.
- Face Colorado. NIST advises: “Place the clock along a wall or near a window that faces Fort Collins, Colorado.” For a desk clock, NIST also suggests trying it rotated by 90 degrees.
- Move it away from electronics. NIST says to keep the clock “at least 1 or 2 meters away from any computer monitors”. Clock maker AcuRite suggests at least 10 feet from other electronics (AcuRite: Atomic clock technology).
- Avoid metal. NIST notes that metal roofs and metal buildings can block the signal.
- Force a sync. Many models have a SIGNAL or REC button; AcuRite says to press and hold it for 10 seconds if your model has one.
- Give it time. NIST says setting itself “usually takes more than one minute … (sometimes 5 minutes or longer)”.
- Use the right batteries. AcuRite’s second troubleshooting step, after checking the time zone and DST setting, is: “Make sure you are using recommended batteries.”
NIST’s coverage maps are “a rough indicator only” because they are “derived from simulated data”, so a clock can work in one room and fail in the next.
Canada after November 1, 2026: the settings that work
NIST explains how a radio clock builds the local time: “WWVB broadcasts UTC as opposed to local time”, the clock applies “a time zone correction of the UTC hour”, and the time code “includes information that tells the RCC whether standard time (ST) or daylight saving time (DST) is currently in effect” (NIST Special Publication 960-14, 2009). That DST information follows the US schedule; clocks “in areas that observe DST should advance one hour at 2 a.m. local time on the second Sunday of March”. NIST also says every clock “must provide the consumer with the option to disable DST” for areas that do not observe it. A clock set to “Pacific” with DST on will therefore jump forward on March 14, 2027, even though British Columbia now stays on UTC-7 all year (the province says “Pacific time will be set seven hours behind co-ordinated universal time (UTC-7)”, BC government, March 2, 2026). Alberta moved to “Alberta Time”, “equivalent to UTC-6:00” (alberta.ca), and Manitoba to UTC-5 (gov.mb.ca). No radio clock has a setting for these new year-round times, and neither NIST nor the clock makers we checked has published one. Our workaround follows from the NIST rules above: pick the zone whose standard time has the same UTC offset as your province’s new year-round time, then disable DST. The clock then applies a fixed correction to the UTC hour and ignores the US DST flag, so it shows the right time all year. For BC, Mountain Standard Time is UTC-7, exactly BC’s new time:
| Place | Offset Dec 2026 | Offset Jul 2027 | Our suggested setting |
|---|---|---|---|
| British Columbia (most of it) | UTC-7 | UTC-7 | Mountain, DST off |
| Yukon | UTC-7 | UTC-7 | Mountain, DST off |
| Southeastern BC (East Kootenay, Golden) | UTC-6 | UTC-6 | Central, DST off |
| Alberta | UTC-6 | UTC-6 | Central, DST off |
| Northwest Territories | UTC-6 | UTC-6 | Central, DST off |
| Saskatchewan | UTC-6 | UTC-6 | Central, DST off |
| Manitoba | UTC-5 | UTC-5 | Eastern, DST off |
| Ontario (most of it) | UTC-5 | UTC-4 | Eastern, DST on |
| Nova Scotia | UTC-4 | UTC-3 | Atlantic, DST on |
| Arizona (most of it) | UTC-7 | UTC-7 | Mountain, DST off |
| Hawaii | UTC-10 | UTC-10 | Hawaii, DST off |
The clock’s display may then say “MST” or “CST”, but the time will be right all year. If your clock cannot switch DST off, it will be an hour off from March 14 to November 6, 2027, and you will need to correct it by hand. If your clock has no Atlantic or Hawaii setting, set the nearest zone and adjust by hand. Offsets are from the IANA tz data; the East Kootenay row follows the tz notes, which record that the Regional District of East Kootenay “adopted year-round -06” in August 2026 and the Town of Golden did the same (tz “northamerica” file). See our full explainer on Canada’s 2026 time changes.
Radio time signals outside North America
Each region broadcasts its own signal and time code, so a clock sold for North America is built for WWVB. Check the box or manual for the signals a clock supports before using it in another region.
| Signal | Run by | Frequency | Transmitter | Area |
|---|---|---|---|---|
| WWVB | NIST (US) | 60 kHz | near Fort Collins, Colorado | North America |
| DCF77 | PTB (Germany) | 77.5 kHz | Mainflingen | Germany and neighbouring countries (it carries “the legal time realized by PTB for Germany”) |
| MSF | NPL (UK) | 60 kHz | Anthorn, Cumbria | “the whole of the UK”, and “most of northern and western Europe” |
| JJY | NICT (Japan) | 40 kHz and 60 kHz | Ohtakadoya-yama and Hagane-yama | Japan |
Sources: NIST WWVB, PTB DCF77 and carrier frequency, NPL MSF, NICT JJY. MSF has planned maintenance shutdowns; NPL lists the next one as “10 December 2026 from 10:00 to 14:00 GMT (UTC)”, a full shutdown, so UK clocks that miss a sync that day are not faulty. Our Germany-US guide explains why DCF77 clocks switch to summer time by themselves.
Is a radio clock really “atomic”?
No atoms are inside. The clock is a radio receiver that copies the time from the broadcast, which NIST derives from its atomic clocks; between successful syncs it runs on its own internal timekeeping. That is why a clock that stops receiving the signal slowly drifts rather than stopping. Our explainer on how atomic clocks work covers the real thing, and how your phone knows the time covers the network route.
How we checked
NIST, AcuRite, PTB, NPL and NICT pages were read today; quoted phrases are copied from them (NIST help page updated June 24, 2026; WWVB page updated December 17, 2025). Offsets in the Canada table are IANA tzdata 2026f values for December 15, 2026 and July 15, 2027, read with Python zoneinfo and checked with glibc localtime(). The suggested setting in each row is our workaround, not an official instruction: the WWVB zone whose standard offset equals the province’s year-round offset, with DST disabled. The NIST rules it relies on are from NIST Special Publication 960-14 (2009 edition).
Sources
- NIST: Help with WWVB radio controlled clocks
- NIST: Radio station WWVB
- NIST Special Publication 960-14: WWVB Radio Controlled Clocks, Recommended Practices for Manufacturers and Consumers (2009)
- AcuRite support: Atomic clock technology
- Government of British Columbia, March 2, 2026
- Government of Alberta: Alberta’s new time system
- Government of Manitoba: time change
- PTB: DCF77 carrier frequency
- NPL: MSF signal (maintenance dates)
- IANA tz source file “northamerica” (East Kootenay, 2026)
- NICT: JJY
Frequently asked questions
Why won’t my atomic clock set itself?
Usually weak reception. Leave it overnight near a window facing Colorado (in North America), at least a metre or two from screens and electronics, and force a sync if it has a signal button.
Why is my atomic clock one hour off?
The DST setting is wrong for your location. Turn DST off in places that do not change clocks, on in places that do.
Why is my atomic clock 3 hours off?
The wrong time zone is selected, for example Eastern instead of Pacific. The minutes will be correct.
What time does an atomic clock sync?
It depends on the model, so check the manual. Reception is best at night, when NIST says the coverage area is largest.
How should I set an atomic clock in BC now?
Our workaround: choose Mountain time and turn DST off. That gives UTC-7 all year, which is BC’s time since November 1, 2026. In the East Kootenay and Golden, which follow Alberta, choose Central with DST off.
Will a US atomic clock work in Europe?
Not unless it also supports the European signals (DCF77 or MSF). Europe uses different transmitters and time codes, so check the manual.