How Atomic Clocks Work: Caesium, NIST-F4 and UTC

An atomic clock keeps time by counting a natural vibration of atoms: under the SI as revised in 2018, one second is defined as exactly 9,192,631,770 cycles of a specific microwave frequency of the caesium-133 atom. National laboratories build clocks that tune a microwave signal to that frequency and count the cycles. Their results are combined by the International Bureau of Weights and Measures (BIPM) near Paris into International Atomic Time and Coordinated Universal Time (UTC), the time your phone ultimately follows. This guide explains how a caesium fountain clock works step by step, how the world’s clocks are combined, what “radio-controlled atomic clocks” at home really are, and what changes are coming for the second and for UTC. Facts are as of November 2026.

At a glance

  • The second is defined by the caesium frequency ΔνCs = 9 192 631 770 Hz (BIPM).
  • NIST-F4, a US caesium fountain announced in April 2025, is accurate to 2.2 parts in 1016. That works out to about 0.7 seconds of drift over 100 million years.
  • About 80 institutes send clock data to the BIPM for the monthly calculation of UTC (BIPM Circular T).
  • Home “atomic” clocks in North America contain no atoms: they pick up NIST’s 60 kHz radio signal WWVB from near Fort Collins, Colorado.
  • The CGPM asked for a proposal for a new definition of the second, based on optical clocks, for its 2030 meeting; UTC stops adding leap seconds from May 20, 2027.

What “one second” means today

The BIPM states the definition: the second “is defined by taking the fixed numerical value of the caesium frequency ΔνCs, the unperturbed ground-state hyperfine transition frequency of the caesium-133 atom, to be 9 192 631 770 when expressed in the unit Hz” (BIPM: SI base unit, the second). In plain terms, caesium atoms can flip between two energy states when hit by microwaves of one exact frequency. Count 9,192,631,770 cycles of that wave and one second has passed.

The reason this works is that every caesium-133 atom is identical, so any laboratory in the world can build a clock to the same standard. Earlier, the second was based on Earth’s rotation and orbit. Earth’s rotation varies slightly, which is why UTC, counted in atomic seconds, has needed leap seconds to stay close to the Sun.

How a caesium fountain clock works, step by step

The most accurate caesium clocks are “fountains”. NIST describes the process (NIST: Fountains of atoms):

  1. Cool the atoms. Laser beams from six directions slow about 100,000 caesium atoms until “the atoms are at rest and packed into a tight, frigid ball”, in less than a second.
  2. Toss them up. “Two vertical laser beams deliver a short pulse that tosses the atomic ball about a meter upward.”
  3. First microwave pulse. On the way up, the atoms pass through a microwave field tuned near caesium’s frequency.
  4. Second pulse. On the way down, they pass through it again, about a second later. That long gap makes the measurement far more sensitive than older beam clocks.
  5. Count and correct. A detector counts how many atoms changed state: “The closer the two frequencies are to one another, the more atoms end up in the higher energy state.” The microwave frequency is adjusted to maximise that number.
  6. Count the cycles. “An electronic counter then counts 9,192,631,770 wave peaks of the fine-tuned microwaves”, and “The time it takes to count those cycles defines the official international second.”

The atoms are slow and cold so that they spend a long time in the microwave field and are barely disturbed by their own motion. That is the whole trick of the fountain.

How accurate is the best clock?

In April 2025, NIST announced NIST-F4, its fourth fountain clock, in Boulder, Colorado. Its frequency measurements were “accurate to within 2.2 parts in 10 to the 16th”, and NIST says that “if it had started running 100 million years ago, when dinosaurs roamed, it would be off by less than a second today” (NIST, April 28, 2025).

We checked that statement a second way. A fractional error of 2.2 × 10−16 over 100 million years (about 3.16 × 1015 seconds) adds up to about 0.69 seconds. Put the other way round, an error of one full second would take about 144 million years to build up. NIST also notes that NIST-F4 is one of fewer than 20 caesium fountains operating worldwide.

From hundreds of clocks to one world time

No single clock defines world time. Each national laboratory keeps its own version of UTC, written UTC(k), such as UTC(NIST) in the US or UTC(NTSC) in China. The BIPM collects their data. Its monthly bulletin, Circular T, is “source of traceability to Coordinated Universal Time (UTC)” and lists the difference between UTC and each laboratory’s UTC(k) at five-day intervals, using data from about 80 institutes (BIPM: Circular T).

The BIPM explains that “UTC is obtained from International Atomic Time (TAI) by the insertion of leap seconds” (BIPM: Time metrology). NIST says fountain clocks “work together to calibrate Coordinated Universal Time, or UTC” (NIST). UTC is therefore a calculated time scale, published after the fact, and each laboratory steers its own clocks to stay close to it. Our UTC vs GMT guide explains how UTC relates to the time zone you use.

How the time reaches you

Route How it works Typical user
Radio signal (WWVB) NIST “continuously broadcasts digital time codes on a 60 kHz carrier” from near Fort Collins, Colorado Wall clocks, clock radios and watches in North America
Internet time servers Computers ask a server (for example, a national lab’s) for the time and correct for network delay Laptops, phones, servers
Satellite navigation GPS and similar systems broadcast time signals; the US Naval Observatory notes that “GPS is ahead of UTC by 18 seconds”, and receivers apply the correction Phones, networks, power grids

The WWVB description is from NIST, which says the broadcasts are used by “millions of people throughout North America” (NIST: Radio station WWVB). So a home clock sold as “atomic” is a radio receiver that copies time from NIST’s atomic clocks; it usually corrects itself when it receives a good signal. Your phone’s time comes through the network and internet routes; our live clock shows the current time for comparison.

What’s next: optical clocks and a new second

Clocks based on optical (light) frequencies tick far faster than caesium’s microwave transition: NIST describes optical frequencies as “trillions of cycles per second, or terahertz”, “tens of thousands of times higher than the microwave frequencies emitted by cesium atoms” (NIST: The second, future), and the scientific community is preparing to redefine the second around them. In October 2026, the General Conference on Weights and Measures adopted Resolution 4, which requests the International Committee for Weights and Measures “to work towards a proposal for the new definition of the second to be presented at the 29th meeting of the CGPM (2030)” (BIPM: CGPM 2026 Resolution 4). Its preamble notes extensive work on optical frequency standards. The new definition is not decided yet.

Two other 2026 decisions matter for timekeeping. Resolution 5 makes UTC continuous from May 20, 2027, with no more leap seconds (BIPM: Resolution 5). Resolution 6 addresses an international lunar reference time scale, based on the IAU’s Lunar Coordinate Time (TCL), for missions to the Moon (BIPM: Resolution 6).

Common questions people get wrong

  • “Atomic clocks are radioactive.” Caesium-133, the isotope used in the definition, is the only isotope in natural caesium (NIST isotopic compositions: Cs), and the CDC says “Naturally occurring cesium is not radioactive and is referred to as stable cesium” (CDC/ATSDR ToxFAQs: Cesium). The clocks use its energy levels, not radioactive decay.
  • “There is one master atomic clock.” World time is a weighted combination of many clocks in many countries, calculated by the BIPM.
  • “My atomic wall clock is as accurate as NIST-F4.” It is only as good as its last radio sync and its own quartz crystal in between.

How we checked

Each quote was checked on the linked BIPM or NIST page. The drift figure was recomputed in Python: 2.2 × 10−16 × 100,000,000 × 365.25 × 86,400 s ≈ 0.69 s, and 1 / (2.2 × 10−16) seconds ≈ 144 million years.

Sources

Frequently asked questions

How does an atomic clock work, simply?

It tunes a microwave signal to the exact frequency at which caesium atoms change energy state, then counts that signal’s cycles: 9,192,631,770 cycles make one second.

How accurate is an atomic clock?

The best caesium fountains, such as NIST-F4, are accurate to about 2 parts in 1016, or less than a second over 100 million years.

How does an atomic wall clock set itself?

In North America it receives NIST’s WWVB radio time code at 60 kHz and sets itself to it. It does not contain an atomic clock.

Who keeps the world’s official time?

The BIPM calculates UTC from clock data sent by about 80 institutes; national labs such as NIST keep local versions of it.

Is the definition of the second changing?

Probably, but not yet. The CGPM asked for a proposal for its 2030 meeting, expected to be based on optical clocks.

Similar Posts